View HE3A802_4462511.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HE3
Vishay
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 C to + 125 C Operation
FEATURES
Vishay HE3 represents a major breakthrough in wet tantalum capacitor technology for high-energy applications. The unique case design provides for the highest capacitance per unit volume. The HE3 also utilizes the proven hybrid technology of our SuperTan(R) product.
Pb-free Available
RoHS*
COMPLIANT
The HE3 is housed in an all tantalum, hermetically sealed case, and is manufactured to withstand high stress and hazardous environments. The design provides a unique double seal for improved reliability and performance.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 C to + 85 C (to + 125 C with voltage derating) Capacitance Tolerance: At 120 Hz, + 25 C 20 % standard 10 % available as special Contact Marketing for Availability of 10 % Tolerance DC Leakage Current (DCL Max.): At + 25 C: Leakage current shall not exceed the values listed in the Standard Ratings tables. Life Test: Capacitors are capable of withstanding a 1000 h life test at a temperature of + 85 C at the applicable rated DC working voltage.
ORDERING INFORMATION
HE3 TYPE C CASE CODE See Ratings and Case Code Table 543 CAPACITANCE K CAPACITANCE TOLERANCE K = 10 % (1) M = 20 % 025 DC VOLTAGE RATING AT + 85 C This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 V) B Z S TEMPERATURE S ESR TERMINATION RELIABILITY AND PACKAGING LEVEL A = 100 % Tin (RoHS compliant) B = Tin/lead and bulk Z = Non-ER
This is expressed in microfarads. The first two digits are the significant figures. The third is the number of zeros to follow.
S = Standard S= (- 55 C to + 85 C) Standard
Note
(1)
Contact marketing for availability of 10 % tolerance
* Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 100 For technical questions, contact: wettants@vishay.com Document Number: 42089 Revision: 30-Jun-08
HE3
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 C to + 125 C Operation
DIMENSIONS in inches [millimeters]
0.0253 0.002 [0.64 0.05] Dia. (No. 22 AWG) Tinned Nickel leads solderable and weldable D Negative Lead (attached to case) L2 T Positive Lead L1 0.156 MAX. H
Vishay
CASE CODE TYPE HE3 A B C D 1.400 0.005 1.400 0.005 1.400 0.005 [35.56 0.127] HEIGHT 0.350 0.015 0.488 0.015 0.615 0.015 [15.6 0.4]
L2 (Min.) 0.500 0.500 0.500 [12.70]
L1 (Min.) 0.500 0.500 0.500 [12.70]
T 0.40 0.015 0.40 0.015 0.40 0.015 [10.2 0.38]
WEIGHT (g) (Typical) 48.0 73.0 95.0
STANDARD RATINGS
CAPACITANCE (F) 18 000 24 000** 36 000** 48 000** 54 000 72 000 8000 16 000 24 000 4000 8000 12 000 2800** 5500** 8200 1900** 3800** 5700** 1100** 2200** 3300** CASE CODE A A B B C C A B C A B C A B C A B C A B C MAX. ESR AT + 25 C, 1 kHz () 25 WVDC AT + 85 C ... 15 WVDC AT + 125 C HE3A183(1)025(2)(3)(4)(5) 0.060 HE3A243(1)025(2)(3)(4)(5) 0.060 HE3B363(1)025(2)(3)(4)(5) 0.045 HE3B483(1)025(2)(3)(4)(5) 0.045 HE3C543(1)025(2)(3)(4)(5) 0.035 HE3C723(1)025(2)(3)(4)(5) 0.035 50 WVDC AT + 85 C ... 30 WVDC AT + 125 C HE3A802(1)050(2)(3)(4)(5) 0.060 HE3B163(1)050(2)(3)(4)(5) 0.045 HE3C243(1)050(2)(3)(4)(5) 0.035 63 WVDC AT + 85 C ... 40 WVDC AT + 125 C HE3A402(1)063(2)(3)(4)(5) 0.060 HE3B802(1)063(2)(3)(4)(5) 0.045 HE3C123(1)063(2)(3)(4)(5) 0.035 80 WVDC AT + 85 C ... 50 WVDC AT + 125 C HE3A282(1)080(2)(3)(4)(5) 0.075 HE3B552(1)080(2)(3)(4)(5) 0.060 HE3C822(1)080(2)(3)(4)(5) 0.040 100 WVDC AT + 85 C ... 65 WVDC AT + 125 C HE3A192(1)100(2)(3)(4)(5) 0.075 HE3B382(1)100(2)(3)(4)(5) 0.060 HE3C572(1)100(2)(3)(4)(5) 0.050 125 WVDC AT + 85 C ... 85 WVDC AT + 125 C HE3A112(1)125(2)(3)(4)(5) 0.100 HE3B222(1)125(2)(3)(4)(5) 0.085 HE3C332(1)125(2)(3)(4)(5) 0.075 PART NUMBER* MAX. DCL AT + 25 C 150 A 150 A 200 A 200 A 300 A 350 A 170 A 270 A 400 A 170 A 270 A 400 A 300 A 400 A 500 A 300 A 400 A 500 A 300 A 400 A 500 A
Notes * (1) Standard capacitance tolerance is 20 % or "M". Contact Marketing for availability of 10 % or "K". (2) Standard termination is "B" or tin/lead. RoHS compliant or 100 % tin is available as "A". (3) Standard reliability is "Z" or non-established reliability. (4) Standard temperature range is "S" or - 55 C to + 125 C. (5) Standard ESR is "S". ** In bold and italic: Preliminary rating and electrical values. Contact Marketing for availability. Document Number: 42089 Revision: 30-Jun-08 For technical questions, contact: wettants@vishay.com www.vishay.com 101
HE3
Vishay
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 C to + 125 C Operation
PERFORMANCE CHARACTERISTICS OF HIGH ENERGY CAPACITORS ELECTRICAL PERFORMANCE CHARACTERISTICS
ITEM Operating Temperature Range Capacitor Tolerance ESR DC Leakage Current (DCL max.) Reverse Voltage Surge Voltage Life Test at + 85 C PERFORMANCE CHARACTERISTICS - 55 C to + 85 C (to + 125 C with voltage derating) 20 % 10 % at 120 Hz Limits per Standard Ratings Table At 25 C the leakage current shall not exceed values listed in the Standard Rating table. No continuous reverse voltage permitted The test shall be at 1000 cycles at 110 % of rated voltage at 85 C. A cycle consists of a one and one half (1.5) min charge and a four and one half (4.5) min discharge through 100 resistor. 1000 h at + 85 C
ENVIRONMENTAL CHARACTERISTICS
ITEM Hermeticity Moisture Resistance Altitude TEST and CONDITIONS MIL-STD-202, Method 112 C/IIIa MIL-STD-202, Method 106 MIL-STD-202, Method 105 C, Test Condition D 100 000 feet test COMMENTS The capacitor shall be hermetically sealed such that the case does not leak electrolyte or vent any gas when exposed to a vacuum.
MECHANICAL PERFORMANCE CHARACTERISTICS
ITEM Thermal Shock Shock Test Condition G Vibration - High Frequency Vibration - Random Test condition I, Letter D Resistance to solder Heat Solderability Terminal Strength MIL-STD-202, Method 210 F ANSI J-STD-002 MIL-STD-202, Method 211 A The capacitor terminals must withstand a 5 pound pull test for 5 to 10 s. The capacitor must not be visibly damaged and the electrical characteristics must not be affected. The capacitor shall be permanently and legibly marked on the circumference of the case. The markings shall be resistant to solvents. See dimensions table, page 2 The capacitor must withstand solder dipping of the terminals at 260 C for 10 s. The capacitor must not be visibly damaged and the electrical characteristics must not be affected. MIL-STD-202, Method 204 D 12 sweeps/axis, 20 g peak Test Condition D MIL-STD-202, Method 214 A 1.5 h/axis, 12 g TEST and CONDITIONS MIL-STD-202, Method 107 G MIL-STD-202, Method 213 B 11 ms, 50 g COMMENTS
Part Markings Weight (Mass)
MIL-STD-202, Method 215 J
www.vishay.com 102
For technical questions, contact: wettants@vishay.com
Document Number: 42089 Revision: 30-Jun-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of HE3A802

	To Download HE3A802 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .